Sinn7 Studio monitor speakers

Geschreven door Reind Dooyeweerd maandag, 02 april 2007 01:09

Ik haalde het al aan in het verslag van de Musik Messe, het "nieuwe merk" Sinn7. Het merk komt uit Duitsland en is van hetzelfde concern als waar ook Glorious (tegenwoordig geen DJ er meer bij) en Reloop onder vallen. Oftewel van de mail order gigant Elevator.

Sinn7 is meer dan alleen maar studio gear, het is meteen ook design.

Of het ook klinkt is allemaal nog maar de vraag maar ik heb de Nederlandse importeur wel om een test sample gevraagd want de Behringer Truth's die hier staan mogen dan wel prima klinken, de Sinn7 speakers zien er wel heel erg nice uit. Alles is leverbaar in 2 kleuren, trendy hoogglans wit of gewoon oersaai zwart. Volgens mij staat er alleen een foutje in de berichtgeving op hun website... waarom een aan en uit knop op een passieve monitor set (in het geval van de Diebox.5)? En volgens mij zag ik op de Messe toch echt dat ze aktief waren. Tijd zal leren of ik nou een goed geheugen heb of niet ;-)

Sinn7 Diebox series.
Sinn7 presents with its "DieBox" passive monitor speaker series two unusually balanced studio speakers which give a convincing performance due to their neutral playback quality, accurate finish and outstanding spatial depiction. Thanks to the compact design they are even easily positioned in small studios. Their powerful performance ratings make them sufficient even for meticulous listening analyses at large production locations. Especially the many possibilities to adjust the speakers to a space’s characteristics are impressive. The aesthetic design is especially emphasised by the high sheen varnish which is perfectly rounded off by the blue Power LED.


Sinn7 Diebox.5

• Magnetically-shielded bass driver unit for high-temperature oscillation coil
• Ferro-fluid cooled tweeter
• Resonance-absorbing MDF high-density housing
• Instantly visible Power LED to the front
• On/Off switch
• Volume control
• Spatial adjustment (0, -2, -4 dB)
• High-frequency amplifier (+2, 0, -2 dB)
• Medium-frequency booster
• Low-frequency cut-off (56, 80, 100 Hz)
  
  Technical specs
  
  
• 50 Watt RMS active monitor speakers
• Max. performance: 80 Watt
• Design: 2-way / bi-amping / bass reflex system
• Input sensitivity: 85 dB
• Speakers: 14.7 cm bass, 8.9 cm tweeter
• Frequency response: 45 Hz - 20 kHz
• Connections: XLR and 6.3 mm jack plug
• Dimensions: 190 x 310 x 210 mm
• Weight: 5 kg (per speaker)
  

Sinn7 Diebox.8

• Magnetically-shielded bass driver unit for high-temperature oscillation coil
• Ferro-fluid cooled tweeter
• Resonance-absorbing MDF high-density housing
• Instantly visible Power LED to the front
• On/Off switch
• Volume control
• Spatial adjustment (0, -2, -4 dB)
• High-frequency amplifier (+2, 0, -2 dB)
• Medium-frequency booster
• Low-frequency cut-off (56, 80, 100 Hz)
  
  Technical Specs
  
  
• 70 Watt RMS active monitor speakers
• Max. performance: 110 Watt
• Design: 2-way / bi-amping / bass reflex system
• Input sensitivity: 85 dB
• Speakers: 20.3 cm bass, 8.9 cm tweeter
• Frequency response: 50 Hz - 20 kHz
• Connections: XLR and 6.3 mm jack plug
• Dimensions: 260 x 380 x 240 mm
• Weight: 8.3 kg (per speaker)

Sinn7 DerSub.10
The active subwoofer - the "DerSub 10" - by Sinn7 provides the "DieBox" monitor system with a solid bass foundation. To prevent the magnetic field of the monitor speakers from creating any interference, the "DerSub 10" is magnetically shielded. The phase inversion and volume control allows the subwoofer to be perfectly integrated into the physical set-up of the two satellites. Its auto function triggers independent activation upon signal input. The 10-incher and its neatly rounded bass-reflex tubular design allow Sinn7’s "DerSub 10" to craft quite an impressive deep bass – a major plus for producers of bass-heavy music.

• Magnetically-shielded bass driver with high-temperature oscillation coil
• Resonance-absorbing MDF high-density housing
• Instantly visible Power LED to the front
• On/Off switch
• Integrated diplexer with manual frequency separation control (50 Hz - 350 Hz)
• Manual phase inversion and control level switch for optimum adaptation to environment
• Volume control with auto switch
• Signal loop to connect further speakers
  
  Technical Specs
  
  
  
• 120 Watt RMS active subwoofer
• Max. performance: 200 Watt
• Design: 1-way / bass reflex system
• Input sensitivity: 89 dB
• Speakers: 25.4 cm bass
• Frequency response: 20 Hz - 350 Hz
• Connections: XLR and 6.3 mm jack plug
• Dimensions: 315 x 420 x 300 mm
• Weight: 16.3 kg (per speaker)