Urei 1605 clubmixer

Geschreven door Reind Dooyeweerd zondag, 29 januari 2006 00:59

En nog een nieuwe Urei mixer, de 1605. In grote lijnen hetzelfde als de 1603 maar hij heeft een extra kanaaltje etc etc. Gewoon net even iets luxer dus.

Wat mij persoonlijk erg opviel is het feit dat het rear panel op de mixer te verplaatsen is naar een andere plek..... handig als je hem in een rack plaatst en er direct boven nog een cd speler gemonteerd moet worden.


The UREI 1605 Installation Music Mixers provide a fully-featured control centre for Clubs and Performing DJs. With the legendary UREI sound quality, stunning looks and Soundcraft's exacting manufacturing construction, they are set to become the new standard in clubs worldwide. No club mixer has been designed to allow total integration with the club sound system while offering the pro dj all necessary the tools of the trade.

Built by dj's, for dj's
The 1605 offers many user friendly features for the club installer/sound engineer - most notably; a rotatable rear connector for table top or rack mount installation, input and output gain controls to configure the mixer to your set up, flexible connectivity for a range of inputs, external mute function AND Soundcraft professional input /output connectivity for unrivaled sound quality.

The 1605 also offers the Dj many pro features making life as a club dj that bit easier - most notably; the huge range of input possibilities (including convenient top panel aux in connectors), fx send and return, super smooth 3 band isolator EQ, ultra clear LED level monitoring, flexible and unique monitoring features within both the booth controls and the headphone monitoring AND of course the famous Urei sound.

Key Features

• 4 Full-function stereo channels
• Each has inputs selectable from Mic, Phono and Line connections
• Phono inputs are switchable to become Line level, individually
• Mic insert on channel 1 for ease of connecting external processing
• Rotateable rear panel allows connectors to be located on the rear or underneath of the console (for best cable access)
• External mute function mutes all channels except mic channel 1 to allow PA announcements but mutes music
• 3-band EQ on Channel 1 (Mic) +/-12dB
• 3-band ISOLATOR EQ on channels 2-7, isolating from full cut to +6dB
• 1 Aux send per channel: - Channel sends switchable pre/post fader individually; Aux Return conveniently located on top panel and can be assigned to crossfader
• Comprehensive CUE/Monitoring system, - Aux Send can be CUE'd to headphones, Aux Return can be CUE'd to headphones
  
• VCA-based crossfader reduces fader noise and allows fully variable control curves for total control of crossfade mixing style
  
• Headphone output on ¼" and Mini-jack connectors
  
• EQ on headphone output
• Booth and Master Outputs on XLR, balanced and RCA, unbalanced
• Comprehensive booth controls - EQ, mute function and L/R/stereo output selector
  
• Separate master mono output
• High Pass filter on Master and booth outputs eliminates stage or turntable rumble
• Balance control on Master output
• Master and booth Output Mono switching
  
• Dj Mic (channel 1 only) to booth output defeat switch
  
• Tri-colour LED shows Signal/Beat/Peak metering
  
• Split Cue Headphone switch
• Flip function switches Cue and Mix in headphones (L and R)
• 10-segment Blue/White/Red LED output metering, which can read Left/Right or Split Cue/Mix
• Integral rack ears for easy desktop/rack mounting
• Individual channel gain structure controls (boost - +14db or reduce -10db)
  
• Master output attenuator pads (engineer only -10 db and -20db)

INPUT AND OUTPUT LEVELS
CD/Line	20Hz-20kHz (+/-0.5dB)
Phono	20Hz-20kHz (+/-1.5dB/RIAA)
Mic [Line]	20Hz-20kHz (+/-2dB) [20Hz-20kHz (+/-0.5dB)]
Aux/FX Return	20Hz-20kHz (+/-0.5dB)
INSERT SEND (unbalanced, Ch1 only)
CD/Line	90dB
Phono	75dB
Mic [Line]	70dB [90dB]
Aux/FX Return	90dB
INSERT RETURN (unbalanced, Ch1 only)
THD	<0.02%
Crosstalk	80dB
PHONO/LINE INPUT (unbalanced)
CD/Line	-12dBu/22kΩ
Phono	-52dBu/47kΩ
Mic [Line]	-52dBu/3k Ω [-12dBu/22kΩ]
Aux/FX Return	-12dBu/22kΩ
XLR INPUT & OUTPUT (3 pin female XLR)
Pin 1 Ground Pin 2 Signal Hot Pin 3 Signal Cold
INSERT SEND and RETURN (1/4" TSR Jack) MIC 1 & 2 Only
Tip Send Ring Return Sleeve Ground
PHONO and ¼" JACKS
Tip Hot Sleeve Screen
HIGH PASS FILTER
18dB/Octave @ 63Hz
MASTER/BOOTH OUTPUT
Output Impedance	75Ω
Recommended Load	600Ω or greater
Frequency Response	+/- 1dB, 20Hz-20kHz
Distortion	< 0.05% THD, 20Hz-20kHz @ +16dbu
Maximum Output	+20dB into 600Ω
HEADPHONE OUTPUT
Output Impedance	<40Ω
Recommended Load	150Ω or greater
Frequency Response	+0, -1dB, 20Hz-20kHz into 200Ω load
Distortion	< 0.05% THD, 20Hz-20kHz @ +16dBu
Maximum Output	190mW into 150Ω
MONO OUTPUT
Output Impedance	75Ω
Recommended Load	2kΩ or greater
Frequency Response	+/- 1dB, 20Hz-20kHz
Distortion	< 0.05% THD, 20Hz-20kHz @ +16dBu
Maximum Output	+20dBu into 2kΩ
EFFECTS LOOP OUTPUT
Output Impedance	~75Ω
Recommended Load	5kΩ or greater
Frequency Response	+/- 1dB, 20Hz-20kHz
Distortion	< 0.05% THD, 20Hz-20kHz @ +16dBu
Maximum Output	+20dB into 2kΩ
NOISE
All channels routed at unity, mix at unity	< -85dB
Crosstalk (@1kHz)	< -85dB
CHANNEL MUTE
Fader Cut-off (rel. 0 Mark)	< -95dB
FX Sends offness	< -90dB
INPUT AND OUTPUT IMPEDANCE
Mic Input	2kΩ
Line Input	45kΩ
Aux Input (Unbalanced RCA Phono)	30kΩ
Master/booth Output	75Ω
Aux Output	75Ω
Headphones Output	40Ω
MAXIMUM OUTPUT LEVELS
Insert Send Output	+20dBu into 2kΩ
Mix Output	+20dBu into 600Ω
Aux Output	+20dBu into 2k
Booth Output	+20dBu into 600Ω
Headphones Output	+20dBu into 300Ω
Headphones	190mW into 150Ω
DIMENSIONS/ WEIGHT
Without rack ears 87.6(H) x 440(W) x 400(D) (mm) With rack ears 87.6(H) x 483(W) x 400(D) (mm) Weight 8.7kgs/ 19.1 lbs