Pioneer CDJ-2000 en CDJ-900 software update 4.04

Geschreven door AboutDJ maandag, 06 juni 2011 15:26

Met de release van software update versie 4.04 brengt Pioneer opnieuw enkele verbeteringen toe aan de CDJ-900 en CDJ-2000. Het gaat om zeer kleine bugfixes, wat betekent dat beide spelers langzaam maar zeker het top van hun kunnen gaan bereiken. Bugfixes zijn er onder meer binnen de Pro DJ Link modus, alsook binnen de Quantized Beat Loops.  Hieronder volgen korte omschrijvingen van de bugfixes. Natuurlijk wordt ook beschreven hoe je de software update kunt installeren.

 

How to determine if your CDJ-2000 requires the firmware update.

1.       Turn on the power of CDJ-2000.

2.       Press [MENU / UTILITY] for over 1 second. Then [UTILITY] screen is displayed.

3.       Scroll the screen menu by a rotary selector, firmware VERSION No.will be displayed.

4.       Press [MENU / UTILITY] to return to the menu screen.

Extract the Firmware File

Right click on downloaded file"CDJ-2000v404.zip" and unzip it by "Extract All" on menu.

1.       Specify the location to extract files.

2.       The files below are extracted on "CDJ-2000v404"file.
C2KMAIN.UPD (5,956,866 bytes)
C2KGUI.UPD (2,015,268 bytes)
C2KPANL.UPD (105,114 bytes)
C2KDRIV.UPD (388,690 bytes) 
*Check the bytes of downloaded firmware by "Right Click"->"Property"

Preparations for updating firmware

Copy the extracted firmware files to the root directry of a USB memory device.

* Do not change the name of the extracted files.

* Use a USB device formatted in FAT or FAT32 (mass storage class).

Program Update Procedures

1.       Please set your CDJ player in status below. 
Power off
No device connected (USB memory, SD Card, LINK or Computer)
No disc loaded

2.       Turn on the power on your CDJ Player during pressing the both "USB" and "RELOOP/EXIT" buttons.
(Continue pressing the both buttons until Pioneer DJ logo screen disappears.)

3.       A message [Connect the USB storage device to the USB port] appears on the display. Then release the both buttons.

4.       Insert the USB memory device containing the firmware files into the USB port.

• Updating will start. The display shows "NOW UPDATING" that message blinks. Also "AUTO BEAT LOOP" LED blinks.
  (If the version of your firmware is Ver.4.01, updating will not start. The dislplay shows "Connect USB srorage device into top USB port.")
• Do not turn the power off during the update.
• The update will be completed in approx. 2 minutes.
• A following message appears when the update is completed.
• [Firmware update is completed. Turn the power off before using. ].

5.       Turn the power off and remove the USB momery device after the upfate has been completed.

If the progress indicator does not progress during updating and update completed message does not appear after 5 minutes, or if the message [MAIN firmware update failed], [GUI firmware update failed], [PANEL firmware update failed] or [SERVO DRIVE firmware update failed] appears, contact our customer support center.

NOTES

• Please follow the update procedure above.
• Do not turn off the power or unplug the power cable before the update completed.
• If you have any questions, contact our customer support center.