Infrasonic releases Blow 4D

Geschreven door Reind Dooyeweerd zondag, 09 november 2008 23:32

Infrasonic (kleine fabrikant van studio apparatuur) komt met een nieuw setje compacte monitor speakers op de proppen welke luisterd naar de naam Blow 4D. Het compacte monitor setje is in tegenstelling tot veel andere monitor setjes uitgerust met een scala aan instel en aansluitmogelijkheden. Zo beschikt de set over zowel analoge als digitale ingangen en biedt de set ook genoeg mogelijkheden om correcties uit te voeren wanneer de ruimte waarin ze neer gezet worden niet optimaal is.

Infrasonic Blow4D
BLOW4D is a a 55-Watt, powered near-field studio monitor speaker. BLOW4D features a two-way, bi-amplifier design to achieve high quality sound. Frequency response is broadened downward by a bass reflex system, and broadened upward by a natural silk dome tweeter for delicate signal reproduction. Enclosure design contributes to the broad frequency response.

BLOW4D is equipped with a DA-912 digital interface module, enabling BLOW4D to be connected to various digital inputs such as AEU/EBU(XLR), S/PDIF(RCA) and an RCA thru connector. The D/A converter in DA-912 supports up to an amazing 24-bit/192kHz sample format with 123dB dynamic range.

From the commercial studio to the home studio, BLOW4D is one of the premier solutions for near field studio monitoring. Use the controls on the back panel of the BLOW4D to your control room acoustics. With output this accurate, you'll hear what you've been missing.

_{Plaatje is klikbaar voor een groter formaat}

Specifications:

• 2-way bass-reflex bi-amplified 4 inch near field studio monitor
• Flat frequency response (±1.5 dB, 73 Hz to 20 kHz) and wide pass-band frequency (62Hz ~ 22kHz)
• 55 watt (25 watt HF and 30 watt LF) power amplifiers with servo-loop and perfect protections.
• 0.75" natural silk dome High frequency transducer
• 4" Polymer coated paper fiber cone low frequency transducer
• Full magnetic shielded enclosure and independent amplifier room
• XLR and 1/4"TRS phone jack balanced/unbalanced inputs
• EASC (Enhanced Acoustic System Compensation) Technology
• Input sensitivity control
• High frequency 3-step tilt controls switch
• Acoustic space control switch
• Bass cut-off frequency control switch
• 4th order active crossover network
• Front Illuminant Logo lamp and protection indicator
• High-strength cabinet constructed MDF composite with radius edges
• XLR for AES/EBU (IEC60958) and RCA for S/PDIF coaxial digital inputs
• RCA thru out port for stereo connection
• IEC60958 EIAJ CP1201 compatible 24-bit digital input with up to 192kHz sample-rate
• High-end 24-bit/192kHz D/A converter with 123dB dynamic range
• XLR/RCA source and Left/Right channel selection switch

The Blow4D monitors are available now at a retail price of $399.99.